- Total ৳ 0.00
- checkout
Think about the last time your whole family sat down for a meal together.
The food was good, the conversation was flowing, and then someone shifted in their chair, and it squeaked loud enough to break the moment. Or worse, a chair that wobbles every time someone leans back, turning a simple dinner into a minor act of balance.
The dining table deserves better than that. So does everyone sitting around it. A good metal dining chair holds its shape, stays quiet, and lets the meal be the main event.
But with prices ranging from budget steel frames to near-premium upholstered designs, choosing the right one without overpaying takes some homework.
HATIM Furniture's metal dining chair range starts from ৳2,000 and goes up to ৳4,700, covering everything from simple everyday chairs to top furniture-quality designs built for busy family dining rooms.
Basic steel dining chairs from online stores start around ৳1,900 to ৳3,500 per piece for simple frames with minimal padding.
Mid-range upholstered metal chairs with leatherette or fabric seats typically land between ৳3,000 and ৳5,000. Premium imported or designer chairs push well beyond ৳8,000 to ৳15,000 per chair.
HATIM Furniture's range lands right in the middle ground, offering consistent 6% discounts across most models with rust-resistant finishes and quality upholstery at prices that make sense for everyday Bangladeshi homes.
HATIM Furniture's current metal dining chair pricing:
Pro Tip: HATIM Furniture applies consistent 6% discounts online across most metal dining chair models.
Buying directly through their website is almost always cheaper than visiting a showroom.
The gap between a ৳2,200 budget chair and a ৳4,700 premium model comes down to five clear differences.
Metal grade and frame thickness matter most.
Budget chairs often use thin mild steel around 1.2mm with basic welding that feels slightly flexible under heavier adults.
HATIM Furniture's higher-end dining chairs use thicker mild steel welded frameworks that feel noticeably more stable and hold their shape through years of daily use.
Rust resistance is non-negotiable in Bangladesh's humid climate.
Cheap metal chairs use simple paint coatings that chip and rust quickly, especially in kitchens near windows. HATIM Furniture's metal frames use zinc-phosphate-coated electrostatic epoxy powder oven-baked paint finishes, which provide long-lasting protection against moisture and rust.
Seat cushion quality separates comfortable chairs from ones you want to leave after ten minutes.
Budget models like the HCFDM-211 use thin foam suited for short meals. Mid-range and premium models like the HCFDM-213 and HCFDS-203 use thicker foam with quality fabric or leatherette upholstery, making longer family dinners genuinely comfortable.
Design complexity adds to the cost, too.
Simple flat-back metal frames are cheaper to produce. Curved backs, upholstered backrests, and intricate metalwork require more material and labor, which is reflected in the pricing of models like the HCFDS-201 and HCFDS-202.
Brand warranty ties it all together.
HATIM Furniture offers a one-year free service warranty on many dining products covering manufacturing faults. Unknown local sellers and basic online stores rarely provide this, which makes the price difference easy to justify for most buyers.
Start with your table.
Most HATIM Furniture metal dining chairs sit at around 17 to 18 inches in seat height, which pairs well with standard dining tables at 28 to 30 inches. That gives you at least 10 to 12 inches of clearance between the seat and the tabletop, which is what you need for comfortable legroom during meals.
What separates top furniture from a cheap buy is how well it fits your actual lifestyle. Match the chair to how often and how long you use it:
Occasional or light use: The HCFDM-211 and HCFDM-216-6-3 are clean, minimal, and affordable.
They work well for small apartments where chairs are used for shorter meals or occasional guests.
Daily family dining: The HCFDM-213 and HCFDM-214-6-3 offer better padding and upholstered backs for comfortable everyday seating without stepping into premium pricing.
Frequent hosting or semi-formal rooms: The HCFDS-203, HCFDS-201, and HCFDS-202 handle heavier daily use and bring a more polished look to larger dining rooms.
Restaurant-style or high-traffic settings: The HKFCT-201-SL-389 is built specifically for high-use environments where durability matters as much as appearance.
Match the style to your dining room.
If your space is modern and minimal, slim-back metal chairs with clean lines and neutral tones keep the room feeling open and uncluttered.
For wooden or mixed-material dining sets, upholstered metal chairs bring in the comfort and warmth that bare metal frames can't offer on their own. And for semi-formal dining rooms with richer finishes and more traditional setups, the higher-end models in HATIM Furniture's range carry the right weight and presence.
When buying online, check three things: the frame finish (powder-coated or epoxy vs. basic paint), the seat cushion type (thin foam vs. thicker upholstered padding), and whether the listing includes a one-year service warranty.
HATIM Furniture's metal dining chair range is built around a practical idea.
Most Bangladeshi families need chairs that handle daily use, resist humidity without rusting, and look good alongside their dining table without requiring a furniture budget that rivals the table itself.
Their zinc-phosphate epoxy finish handles moisture far better than bare-painted steel, the cushion quality scales with the price, and the frame construction across the mid and upper range is built for real long-term use.
Free nationwide delivery with a 3 to 15-day window means buyers in Dhaka, Chittagong, Sylhet, and beyond can order without visiting a showroom. The one-year service warranty covers manufacturing faults, so if a weld loosens or upholstery stitching fails early, it's handled at no extra cost.
Finding the right metal dining chair means matching the chair to the table, the room, and how your family actually eats.
HATIM Furniture's range covers every need from a ৳2,000 clean budget chair for everyday use to a ৳4,700 premium upholstered model for families who sit down together every night.
Pick the frame finish that handles your kitchen's humidity, the padding level that suits your meal lengths, and the style that fits the room you've already built. The right dining chair doesn't just fill a seat. It makes every meal worth sitting down for.
For daily family dining, choose an upholstered metal chair with thicker foam padding and a powder-coated frame. HATIM Furniture's mid-range models offer this combination at a reasonable price.
HATIM Furniture's range starts from ৳2,200 for simple budget chairs and goes up to ৳4,700 for premium upholstered models, with consistent 6% discounts available online.
Most standard dining chairs sit at 17 to 18 inches, pairing comfortably with dining tables at 28 to 30 inches and giving at least 10 to 12 inches of legroom clearance.
Cheap painted steel chairs do rust over time. Look for powder-coated or epoxy-finished frames. HATIM Furniture's uses a zinc-phosphate-coated electrostatic epoxy finish that resists moisture and prevents rusting.
Go for slim-back, minimal designs. They take up less visual space, keep the room feeling open, and work well for shorter meals or occasional guests without overcrowding the dining area.
It depends on the padding. Thin foam seats are fine for short meals. For longer family dinners, choose chairs with thicker upholstered seats and contoured backs for better support.
Yes. HATIM Furniture's restaurant-style chairs, like the HKFCT-201-SL-389 are built specifically for high-use environments where durability and appearance both matter.
Yes. HATIM Furniture provides a one-year free service warranty on many dining products, covering manufacturing defects, including frame issues, loose welds, and upholstery faults.
Yes. All models are available on HATIM Furniture's website with nationwide delivery taking 3 to 15 day,s depending on your location.
Wipe the frame weekly with a dry or slightly damp cloth to prevent dust buildup. Clean upholstered seats with mild soap and avoid prolonged exposure to moisture to protect the frame finish.
Shopping Options
price
Materials